Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Inglewood
AC installation in Inglewood typically runs $3,500 to $7,500 for a complete system, and the job usually takes one to two days depending on whether your home needs ductwork, electrical upgrades, or seismic bracing. We know Inglewood’s housing stock better than most: the 1920s bungalows off Arbor Vitae, the mid-century single-story homes near Darby Park, the newer townhomes going up around SoFi Stadium. Each one presents different challenges, and we’ve seen them all. Call (424) 358-3791 for a free estimate and a written price before any work begins.
What makes us different starts before the install: you book online, get a live arrival time, and track your technician to the door. No four-hour windows. No vague “sometime Tuesday.” Andre Fuller leads our crew, and every job starts with a written price locked in before we touch a single tool. If it’s not done right, our 365-Day Done Right Promise means we make it right, in writing, for a full year.
Why Halden Heating and Air Torrance Is Inglewood’s Preferred AC Installation Company
We’ve built our reputation in Inglewood by treating every install like it’s our own home. Founded in 2004, we’re part of the Relay Home Co. network of independently owned, locally operated HVAC businesses, and we hold ourselves to The Relay Visibility Guarantee on every job: written price first, live tracking, before-and-after photos, and a written guarantee on every repair. Inglewood homeowners call us because they know exactly what they’re getting before we arrive.
Our response time to Inglewood neighborhoods is measured in hours, not days. When a heat wave hits and the Santa Anas push temperatures past 100°F, we answer the phone 24/7 with a live person. No voicemail trees. No “leave a message and we’ll get back to you.” You tell us the address off Crenshaw or La Brea, and we route a background-checked, uniformed tech to you with a live ETA you can track.
We know the local quirks that make Inglewood installs different. The salty marine air near the 405 eats standard condenser coils in three to five years. The raised foundations and small attics on 1930s homes mean ductwork routes are tight and unforgiving. The original electrical panels on many pre-1950 homes can’t handle a modern compressor’s start-up draw. We plan for all of it before the equipment ever gets ordered.
Styles & brands we work with
Furnace Installation in Inglewood
Furnace Installation in Inglewood is a job we handle routinely for older homes that are finally getting a full heating and cooling upgrade. Most Inglewood homes built between the 1920s and 1950s have either a wall heater, a floor furnace, or no heating at all beyond a handful of space heaters. When you’re already upgrading the electrical panel and adding an AC system, it usually makes sense to install a modern furnace at the same time rather than paying for a second permit cycle and a second crew visit later.
Furnace installation in Inglewood typically falls within the same $3,500 to $7,500 range as AC installation when done as part of a combined system. If you’re replacing just a furnace, figure on the lower end. The variables are the furnace’s efficiency rating, whether you need new ductwork, and whether your existing gas line needs to be upsized to meet current code.
Gas Furnace Replacement
If your existing furnace is 15 years old or more, a replacement usually makes more sense than another repair. We install furnaces from Bryant, American Standard, Carrier, and Trane, and we’ll match the furnace to your home’s heat load so you’re not paying to heat air that leaks out of 1940s single-pane windows.
Furnace Plus AC Combo Installs
Doing both at once saves you the cost of a second permit and a second round of drywall patching. We also handle the electrical panel upgrades that older Inglewood homes almost always need, which means one crew, one schedule, and one written price for the whole job.
HVAC Installation in Inglewood
HVAC Installation in Inglewood means more than bolting a condenser to a pad and calling it done. For most of the homes we service here, it means solving the problems that come with houses built before central air was standard: no existing ductwork, undersized electrical service, knob-and-tube wiring, and attics that were never meant to hold a full air handler. We handle all of it as a single project with a single written price.
A complete HVAC installation in Inglewood runs $3,500 to $7,500 depending on the equipment, the ductwork scope, and whether your electrical panel needs an upgrade. That’s the honest range for this market. We don’t quote low to get the job and then “discover” problems at the door. The written price we give you before work starts is the price you pay.
Ductless Mini-Split Systems
For Inglewood homes without ductwork, a ductless mini-split is often the smartest route. We ran a Daikin mini-split through a 1930s bungalow off Arbor Vitae Street where the original 60-amp panel couldn’t handle the compressor’s locked-rotor amps. Andre’s crew upgraded the panel, installed a coated condenser coil and a high-ambient kit, and set the refrigerant charge for a long lineset run to the back bedroom. Now the compressor starts on a 100°F Santa Ana day without tripping a breaker. That’s the kind of planning you need here.
Central Air with New Ductwork
If you have the attic space for it, a central system with new ducts is still a solid option in Inglewood. The key on older wood-frame homes is routing the ductwork through the small attic without crushing the insulation or blocking access to the electrical panel. We plan every run before we cut the first hole.
Trusted Brands We Service in Inglewood
We’re certified to install and service Bryant, Carrier, Trane, American Standard, and the rest of the major residential brands. More importantly, we stock the parts Inglewood installs actually need: coastal-coated condenser coils, high-ambient kits, long linesets, and the seismic bracing hardware the city requires. That means when your system needs a part two years from now, we’re not waiting on a distributor in Phoenix to ship it. Call (424) 358-3791 and we’ll spec the right equipment for your home, your panel, and the salt air coming off the coast.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Inglewood Homes
- Undersized electrical panels. Homes built in the 1920s through 1950s often still have 60-amp or 100-amp panels. A modern condenser’s locked-rotor amps can trip the main breaker every time the compressor kicks on, which leads to repeated capacitor failures or a burned-out compressor. We check the panel before we quote, not after the unit is installed.
- Salt-eaten condenser coils. In the western neighborhoods near the 405 like Morningside Park, standard aluminum fins start pitting within two summers. That corrosion reduces heat exchange and raises static pressure across the evaporator coil, which shortens the whole system’s life. Coastal-coated coils are not an upsell here; they’re the only sensible choice.
- Unpermitted additions that complicate retrofits. Plenty of Inglewood homes have added rooms that were never permitted. When you run new condensation lines through those walls and the city inspects, the whole install can fail final. We pull permits on every job and route lines where they’re legal, not where they’re easy.
- Seismic bracing that gets skipped. Inglewood sits near the Newport-Inglewood fault. City code requires specific bracing for rooftop units and condensation lines. A contractor who skips it saves a few hundred dollars and leaves you with a system that won’t pass inspection and could fail when the ground moves.
Pricing for AC Installation in Inglewood, CA
Here’s the honest breakdown for Inglewood. A full AC installation runs $3,500 to $7,500. The range depends on three things: whether your home has ductwork or needs a ductless system, whether your electrical panel needs an upgrade, and whether you need a coastal-coated condenser coil to survive the salt air near the 405.
| Service | Price Range in Inglewood |
|---|---|
| AC Installation | $3,500 – $7,500 |
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
Every quote is a written price delivered before work starts. Free estimates, no door-step surprises. Call (424) 358-3791 and we’ll walk the house, check the panel, and give you a number you can take to the bank.
We Also Serve Cities Near Inglewood
Our service area covers the communities right around Inglewood, including Hawthorne, El Segundo, Lawndale, and Manhattan Beach. If you’re just over the border and need AC installation, call (424) 358-3791 and we’ll route a tech your way with the same written-price guarantee we give every Inglewood customer.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Inglewood
Yes, Inglewood requires a mechanical permit for a ductless mini-split install, and the electrical work needs a separate electrical permit. We pull both on every job and handle the inspection scheduling. Skipping permits is how you end up with condensation lines routed through unpermitted walls and a final inspection that fails, which we see on plenty of older Inglewood homes. Call (424) 358-3791 and we’ll handle the paperwork.
A coastal-coated coil has a factory-applied corrosion-resistant coating on the aluminum fins. In Inglewood’s western neighborhoods like Morningside Park, a standard coil starts pitting within two summers because of the salt-laden marine air coming off the coast. That pitting cuts heat exchange efficiency and shortens the condenser’s life by three to five years. The coated coil costs more upfront but it’s cheaper than replacing a condenser in year six.
Twice a year, minimum. The salt air corrodes coil fins and electrical connections faster than inland. We recommend a spring tune-up before the first heat wave and a fall check after the Santa Ana season. A tune-up runs $80 to $200, and our techs are not paid on what they sell, so the report you get is what’s actually wrong, not a sales pitch. Call (424) 358-3791 to schedule one.
Yes, with a ductless mini-split system. The condenser sits outside, a thin refrigerant line runs through a small exterior penetration, and a wall-mounted or ceiling-mounted air handler cools the room. It’s the cleanest solution for Inglewood’s 1920s and 1930s bungalows with raised foundations and small attics that were never built for central ductwork. We’ve installed dozens of these systems in homes off Arbor Vitae, Manchester, and Century.
A typical 1,200 to 1,500 square foot single-story Inglewood home usually needs a 2.5 to 3 ton system. But the right answer depends on your window condition, insulation, ceiling height, and which way the house faces. A west-facing home near the 405 gets hammered by afternoon sun and may need more capacity than a shaded home near Darby Park. We run a proper heat load calculation on every quote, never a rule-of-thumb guess. Call (424) 358-3791 for the exact number on your house.
Written by Andre Fuller, Owner at Halden Heating and Air Torrance, serving Inglewood since 2004.